Slatwall is a flexible and visually appealing wall merchandising system. Select from Economical Paint Grade, Pre-Finished Low Pressure Laminates, Wood Veneer or Specialty Finishes. A 48" x 96" medium density fiber board (MDF) panel provides strength and durability. The standard groove spacing is 3" O.C. although other spacing may be specified.
We welcome your custom Slatwall order - whether your need is for aluminum inserts or a custom color
Cut Slatwall panels face up on a table saw or face down with a circular saw. Use a sharp 60-80 tooth blade for best results. Attach Slatwall to existing drywall or directly to studs in new construction (if local building codes permit). On standard panels, use two-inch or longer drywall screws installed through the grooves and into wall studs. For panels with aluminum inserts drill pilot holes first, then use two-inch or longer #6 pan head screws. A minimum of 24 screws should be evenly spaced throughout each panel. Construction adhesives may also be used to provide a more permanent installation.
